FAQ
The IDE screw press dewatering machine is structurally designed to help reduce the risk of clogging compared with some traditional filter-cloth-type equipment. However, actual operating stability is still affected by sludge characteristics, fiber content, oil and grease ratio, chemical conditions, and operating settings. If you would like to confirm whether it is suitable for your sludge condition, we recommend providing an on-site sludge sample or arranging a test for evaluation.
There is no single fixed answer for the moisture content of dewatered sludge, as it varies depending on the sludge source, concentration, chemical reaction conditions, equipment settings, and operating conditions. If the goal is not only dewatering but also further reducing sludge weight and disposal cost, it may also be worth evaluating whether drying equipment should be added. We recommend conducting sample testing to obtain data that is closer to actual site conditions, which can then be used as a basis for equipment selection and subsequent planning.
Whether oily sludge is suitable for a screw press dewatering machine depends on the oil and grease ratio, sludge viscosity, suspended solids characteristics, and upstream treatment conditions. Some oily sludge applications are indeed feasible, but sludge testing or on-site condition evaluation is still necessary to determine whether the equipment configuration, chemical conditions, and operating method are appropriate.
Limited space does not necessarily mean the equipment cannot be installed, but it is still necessary to first confirm the on-site traffic flow, equipment access direction, operating and maintenance space, piping arrangement, and power supply conditions. FU CHAN MACHINERY can evaluate the equipment layout based on actual site conditions and help determine whether a standalone installation, modular configuration, or adjustment of upstream and downstream processes would be more appropriate.
After equipment delivery, the follow-up support provided may vary depending on the equipment type, on-site operating conditions, and customer requirements. It generally includes operation guidance, equipment inspection, abnormal condition assessment, spare parts supply, and on-site assistance when necessary. The actual service scope can be further confirmed according to project conditions and equipment configuration.
The response time for technical support depends on the region, equipment condition, severity of the issue, and on-site requirements. If abnormal conditions occur, we recommend first providing photos, videos, alarm messages, or operating conditions so that we can make an initial assessment. If an on-site visit is required, personnel will be arranged according to the actual situation.
A sudden change in sludge cake moisture content is usually not caused by just one factor. It may be related to chemical dosing conditions, sludge concentration, feed volume, back pressure setting, operating parameters, or changes in sludge characteristics. If the moisture content rises suddenly on site, we recommend first recording the operating conditions and sludge status at that time, and then having technical personnel help identify the actual cause, so that adjusting only a single parameter does not negatively affect the overall performance.
Abnormal noise during operation may be caused by foreign material in the feed, bearings, the drive system, changes in screw shaft load, or other mechanical factors. It is recommended to stop abnormal operation first and confirm the equipment condition to avoid further damage caused by continued running. If the cause cannot be clearly identified on site, you may provide a video or operating details so that we can assist with an initial assessment.
Whether existing old equipment is suitable for upgrading depends on the equipment age, structural condition, required treatment capacity, available site space, and the existing process flow. In some cases, efficiency can be improved through updating a single machine, while in others the overall process may need to be reviewed again. We recommend providing on-site photos, equipment type, and the current problems encountered so that we can help evaluate whether modification or replacement would be worthwhile.
FU CHAN MACHINERY’s equipment can be applied in a wide range of industrial wastewater and sludge treatment fields. However, sludge characteristics, operating conditions, and treatment goals vary from one industry to another. If you are not sure whether your industry or sludge condition is suitable, we recommend contacting us and providing the basic treatment capacity, sludge source, and on-site requirements so that we can assist with an initial assessment.
Sample evaluation testing is one of the important assessment methods before equipment selection. Through sample testing, it is possible to gain a preliminary understanding of sludge dewatering response, chemical conditions, and the treatment performance that may be achievable. However, actual equipment planning still needs to be evaluated together with on-site treatment capacity, operating conditions, and downstream disposal requirements.
You are welcome to contact us through the following methods: phone 07-6225989, email: ide0928@ms34.hinet.net, or through our official LINE account. We will reply to your inquiry as soon as possible.